HOSPITALAR WASHER EXTRACTOR (WITH SANITARY BARRIER)
- Capacities of 30, 70, 100, 140 and 250 kg;
- Robust construction;
- Fully automated;
- Rotations controlled by frequency inverter;
- Smart pneumatic suspension;
- Horizontal drum with thru axle;
- Exclusive “LOW WATER” system for low water consumption;
- Manufactured within international safety and operation standards.
FRONTAL WASHER EXTRACTOR
- Capacities of 20, 30, 50 and 100 kg;
- Robust construction;
- Fully Automated;
- Rotations Controlled by Frequency Inverter;
- Intelligent Mechanical Suspension;
- Exclusive “LOW WATER” system for low water consumption;
- Manufactured within international safety and operation standards.
HORIZONTAL WASHER EXTRACTOR (WITH OR WITHOUT SANITARY BARRIER)
- Capacities of 30, 70, 120, 140 and 250 kg;
- Robust construction;
- Fully automated;
- Rotations controlled by frequency inverter;
- Smart pneumatic suspension;
- Horizontal drum with thru axle;
- Exclusive “LOW WATER” system for low water consumption;
- International standards construction.
HORIZONTAL WASHER EXTRACTOR
- Capacities of 30, 70, 120, 140 and 250 kg;
- Robust construction;
- Fully automated;
- Rotations controlled by frequency inverter;
- Smart pneumatic suspension;
- Horizontal drum with thru axle;
- Exclusive “LOW WATER” system for low water consumption;
- Manufactured within international safety and operation standards.
FRONTAL PRE-EXTRACTOR WASHER
- Capacities of 100, 150, 240, 300, 360, 420 and 500 kg;
- Robust construction;
- Drum made entirely of stainless steel;
- Transmission by motoredutor, without pulleys or belts;
- Rotations controlled by frequency inverter;
- Fully automated;
- Water inlet controlled by liter counter;
- Frontal tilting for unloading (except models 100 and 150 kg);
- Exclusive “Low Water” System for saving water;
- Pre-extraction (110 RPM) to remove excess of water;
- Manufactured within international standards of security and operation.
HIGH-SPEED WASHER-EXTRACTOR
- Available in 15, 20, and 25 kg capacities;
- Robust construction;
- Fully automated with a PLC touchscreen;
- 02 waters inlet;
- Can be used for washing with the WETCLEANING system;
- Speeds controlled by a frequency inverter;
- Intelligent mechanical suspension;
- Exclusive "LOW WATER" system for low water consumption;
- Heating system using heating elements;
- Manufactured in compliance with international safety and operational standards.
FRONTAL WASHER EXTRACTOR (WITHOUT SANITARY BARRIER)
- Capacities of 20, 30, 50 and 100 kg;
- Robust construction;
- Fully Automated;
- Rotations Controlled by Frequency Inverter;
- Intelligent Mechanical Suspension;
- Exclusive “LOW WATER” system for low water consumption;
- Manufactured within international safety and operation standards.
HORIZONTAL WASHER
- Capacities of 150, 250 and 400 kg
- Robust construction;
- Internal drum made entirely of stainless steel;
- Transmission by reducer and pulleys;
- Rotations controlled by frequency inverter;
- Semi-automated with time and temperature control
- Exclusive “Low Water” system to save water;
- Manufactured within international safety and operation standards.
TUMBLE DRYER
- Capacities of 20, 30, 50, 100, 150 and 200 kg (Load Factor 1:30 - Brazil);
- Capacities of 30, 45, 75, 150, 200 and 300 kg (Load Factor 1:20 - International);
- Heating options: electric (up to 75 kg), gas or steam;
- Robust construction;
- Transmission by gear motor (without belts or pulleys);
- Rotations controlled by frequency inverter;
- Drum made of stainless steel without internal welding (NWIS - no welding inside system);
- Frontal tilting for unloading in 200 and 300 kg models (150 kg is optional);
- Drying system by time/temperature;
- Drying system by humidity percentage (optional);
- Manufactured within international safety and operation standards.
FRONTAL WASHER EXTRACTOR
- Capacities of 30, 50 and 100 kg;
- Robust construction;
- Fully Automated;
- Rotations Controlled by Frequency Inverter;
- Intelligent Mechanical Suspension;
- Exclusive “LOW WATER” system for low water consumption;
- Manufactured within international safety and operation standards.
TUMBLE DRYER
- Capacities of 20, 30 and 50 kg (Load Factor 1:30 -
Brazil);
- Capacities of 30, 45 and 75 kg (Load Factor 1:20 -
International);
- Heating options: electric, gas or steam;
- Robust construction;
- Transmission by gear motor (without belts or pulleys);
- Rotations controlled by frequency inverter;
- Drum made of stainless steel without internal welding (NWIS - no welding inside system);
- Drying system by time/temperature;
- Drying system by humidity percentage (optional);
- Manufactured within international safety and operation standards.
HORIZONTAL WALL-MOUNTED IRONER
- Useful widths of 1600mm and 2000mm;
- Electric heating;
- Heated gutter made of stainless steel;
- Roll covered with polyester needle felt;
- “Direct drive” transmission (without pulleys or belts);
- Rotations controlled by frequency inverter;
- Digital temperature control;
- Manufactured within international safety and operation standards.
HIGH-SPEED
WASHER-EXTRACTOR
- Available in 15, 20,
and 25 kg capacities;
- Robust
construction;
- Fully automated with a PLC touchscreen;
- 02 waters inlet;
- Can be used for washing with the WETCLEANING system;
- Speeds
controlled by a frequency inverter;
-
Intelligent mechanical suspension;
- Exclusive
"LOW WATER" system for low water consumption;
- Heating system using heating elements;
-
Manufactured in compliance with international safety and operational standards.
HIGH-SPEED WASHER-EXTRACTOR
- Available in 15, 20, and 25 kg capacities;
- Robust construction;
- Fully automated with a PLC touchscreen;
- 02 waters inlet;
- Can be used for washing with the WETCLEANING system;
- Speeds controlled by a frequency inverter;
- Intelligent mechanical suspension;
- Exclusive "LOW WATER" system for low water consumption;
- Heating system using heating elements;
- Manufactured in compliance with international safety and operational standards.
PRECISION DYER WITH CENTRIFUGATION (FOR ATMOSPHERIC DYEING)
- For garment dyeing or seamless pieces in cotton, polyamide or mixed;
- Capacities of 70, 140 and 250 kg;
- Robust construction with choice of AISI 304 or 316 stainless steel;
- Fully Automated;
- Water inlet controlled by liter counter sensor;
- Rotations controlled by frequency inverter;
- High centrifugation speed;
- Intelligent Pneumatic Suspension;
- Horizontal drum bipartite (70 and 140 kg) or tripartite (250 kg) with through axle;
- Indirect heat exchanger for controlled heating and cooling;
- 02 (two) preparation and addition tanks with agitator, level control and controlled addition;
- Soap dish for adding solids;
- Recirculation Pump;
- Fluff filter with 02 filter elements (while one is in use, the other is in cleaning);
- Manufactured within international safety and operation standards.
HORIZONTAL WALL-MOUNTED IRONER
- Useful widths of 1600mm and 2000mm;
- Electric heating;
- Heated gutter made of stainless steel;
- Roll covered with polyester needle felt;
- “Direct drive” transmission (without pulleys or belts);
- Rotations controlled by frequency inverter;
- Digital temperature control;
- Manufactured within international safety and operation standards.
CENTRIFUGE FOR CLOTHES
- Capacities of 50, 100 and 200 kg;
- Robust construction;
- Rotations Controlled by frequency inverter;
- Digital controller for programming the centrifugation time;
- Pneumatic suspension (except for 50 kg capacity);
- Brake by electrical braking resistor, without human action or mechanical drives, for greater safety;
- "Zero movement" sensor that only authorizes the opening of the door with the equipment completely stopped;
- Internal drum with exclusive flat bottom, for more space;
- The 200 kg model has the option of an additional basket and hoist for loading and unloading;
- Manufactured within international safety and operation standards.
TUMBLE DRYER
- Capacities of 20, 30, 50, 100, 150 and 200 kg (Load Factor 1:30 -
Brazil);
- Capacities of 20, 45, 75, 150, 200 and 300 kg (Load Factor 1:20 -
International);
- Heating options: electric (up to 75 kg), gas or steam;
- Robust construction;
- Transmission by gear motor (without belts or pulleys);
- Rotations controlled by frequency inverter;
- Drum made of stainless steel without internal welding (NWIS - no welding inside system);
- Frontal tilting for unloading in 200 and 300 kg models (150 kg is optional);
- Drying system by time/temperature;
- Drying system by humidity percentage (optional);
- Manufactured within international safety and operation standards.
HIGH PRODUCTION IRONER
- Diameters of 450mm and 800mm;
- Useful widths of 3000mm and 3300mm;
- Options with 01, 02, 03 or 04 heated rollers (Ø450mm manufactured with only 01 roller);
- Electric, gas or steam heating options;
- Finishing cylinder with hard chrome finish;
- Rotations controlled by frequency inverter;
- Digital temperature control;
- Robust construction;
- Manufactured within international safety and operation standards.
TUMBLE DRYER
- Capacities of 20, 30, 50, 100, 150 and 200 kg (Load Factor 1:30 -
Brazil);
- Capacities of 30, 45, 75, 150, 200 and 300 kg (Load Factor 1:20 -
International);
- Heating options: electric (up to 75 kg), gas or steam;
- Robust construction;
- Transmission by gear motor (without belts or pulleys);
- Rotations controlled by frequency inverter;
- Drum made of stainless steel without internal welding (NWIS - no welding inside system);
- Frontal tilting for unloading in 200 and 300 kg models (150 kg is optional);
- Drying system by time/temperature;
- Drying system by humidity percentage (optional);
- Manufactured within international safety and operation standards.
TUMBLE DRYER
- Capacities of 20, 30, 50, 100, 150 and 200 kg (Load Factor 1:30 -
Brazil);
- Capacities of 30, 45, 75, 150, 200 and 300 kg (Load Factor 1:20 -
International);
- Heating options: electric (up to 75 kg), gas or steam;
- Robust construction;
- Transmission by gear motor (without belts or pulleys);
- Rotations controlled by frequency inverter;
- Drum made of stainless steel without internal welding (NWIS - no welding inside system);
- Frontal tilting for unloading in 200 and 300 kg models (150 kg is optional);
- Drying system by time/temperature;
- Drying system by humidity percentage (optional);
- Manufactured within international safety and operation standards.
TOWEL FOLDER WITH STACKER
- Folding area of 1800 x 1200mm;
- 04 separation rails;
- Multiple folding possibilities
- Robust construction;
- Automated with PLC touch screen;
- Velocities controlled by frequency inverter;
- Manufactured within international safety and operation standards.
CABIN FOR DRYING, DISINFECTION AND DEODORIZATION
- Robust structure made in steel with electrostatic painting;
- Automated by PLC (Programmable Logic Controller);
- Drying system with electric or steam heating option;
- Intended for the static drying of gloves, boots and gowns used in cold storage;
- Disinfection with ozone and also contamination by bacteria, mites, fungi and even viruses;
- Deodorization with ozone that eliminates any type of odour.
SHEET FOLDER WITH STACKER
- Useful widths of 3000mm and 3300mm;
- Robust construction;
- 05 folds (02 longitudinal and 03 transversal);
- 04 tracks for various sizes of pieces;
- Automated with touch-screen PLC;
- Rotations controlled by frequency inverter;
- Adaptable to any type of ironer;
- Manufactured within international safety and operation standards.
HORIZONTAL WALL-MOUNTED IRONER
- Useful widths of 1600mm and 2000mm;
- Electric heating;
- Heated gutter made of stainless steel;
- Roll covered with polyester needle felt;
- “Direct drive” transmission (without pulleys or belts);
- Rotations controlled by frequency inverter;
- Digital temperature control;
- Manufactured within international safety and operation standards.
TOWEL FOLDER WITH STACKER
- Folding area of 1800 x 1200mm;
- 04 separation rails;
- Multiple folding possibilities
- Robust construction;
- Automated with PLC touch screen;
- Velocities controlled by frequency inverter;
- Manufactured within international safety and operation standards.
HIGH PRODUCTION IRONER
- Diameters of 450mm and 800mm;
- Useful widths of 3000mm and 3300mm;
- Options with 01, 02, 03 or 04 heated rollers (Ø450mm manufactured with only 01 roller);
- Electric, gas or steam heating options;
- Finishing cylinder with hard chrome finish;
- Rotations controlled by frequency inverter;
- Digital temperature control;
- Robust construction;
- Manufactured within international safety and operation standards.
SHEET FOLDER WITH STACKER
- Useful widths of 3000mm and 3300mm;
- Robust construction;
- 05 folds (02 longitudinal and 03 transversal);
- 04 tracks for various sizes of pieces;
- Automated with touch-screen PLC;
- Rotations controlled by frequency inverter;
- Adaptable to any type of ironer;
- Manufactured within international safety and operation standards.
TOWEL FOLDER WITH STACKER
- Folding area of 1800 x 1200mm;
- 04 separation rails;
- Multiple folding possibilities
- Robust construction;
- Automated with PLC touch screen;
- Velocities controlled by frequency inverter;
- Manufactured within international safety and operation standards.