INDUSTRIAL WASHER EXTRACTOR
- Capacities of 30, 70, 100, 140 and 250 kg;
- Robust construction;
- Fully automated;
- Rotations controlled by frequency inverter;
- Smart pneumatic suspension;
- Horizontal drum with thru axle;
- Exclusive “LOW WATER” system for low water consumption;
- Manufactured within international safety and operation standards.

FRONTAL WASHER EXTRACTOR

- Capacities of  30, 50, 100 and 150 kg;

- Robust construction;

- Fully Automated;

- Rotations Controlled by Frequency Inverter;

- Intelligent Mechanical Suspension;

- Exclusive “LOW WATER” system for low water consumption;

- Manufactured within international safety and operation standards.

HIGH-SPEED WASHER-EXTRACTOR

- Available in 15, 20, and 25 kg capacities;

- Robust construction;

- Fully automated with a PLC touchscreen;

- 02 waters inlet;

- Can be used for washing with the WETCLEANING system;

- Speeds controlled by a frequency inverter;

- Intelligent mechanical suspension;

- Exclusive "LOW WATER" system for low water consumption;

- Heating system using heating elements;

- Manufactured in compliance with international safety and operational standards.

TUMBLE DRYER

- Capacities of 30, 50, 75, 100, 150, 200 and 300 kg (Load Factor 1:20);

- Heating options: electric, gas or steam;

- Robust construction;

- Rotations controlled by frequency inverter (optional up to 50 kg);

- Drum made of stainless steel without internal welding (NWIS - no welding inside system);

- Frontal tilting for unloading in 200 and 300 kg models (150 kg is optional);

- Drying system by time/temperature;

- Drying system by humidity percentage (optional);

- Manufactured within international safety and operation standards.

HORIZONTAL WALL-MOUNTED IRONER

- Useful widths of 1600mm, 2000mm and 2500mm;

- Electric heating;

- Heated gutter made of stainless steel;

- Roll covered with polyester needle felt;

- “Direct drive” transmission (without pulleys or belts);

- Rotations controlled by frequency inverter;

- Digital temperature control;

- Manufactured within international safety and operation standards.

HIGH PRODUCTION IRONER

- Diameters of Ø500mm and 800mm;

- Useful widths of 3000mm and 3300mm;

- Options with 01, 02, 03 or 04 heated rollers (Ø500mm manufactured with only 01 roller);

- Electric, gas or steam heating options;

- Finishing cylinder with hard chrome finish;

- Rotations controlled by frequency inverter;

- Digital temperature control;

- Robust construction;

- Manufactured within international safety and operation standard

SHEET FOLDER WITH STACKER

- Useful widths of 3000mm and 3300mm;

- Robust construction;

- 05 folds (02 longitudinal and 03 transversal);

- 04 tracks for various sizes of pieces;

- Automated with touch-screen PLC;

- Rotations controlled by frequency inverter;

- Adaptable to any type of ironer;

- Manufactured within international safety and operation standards.

TOWEL FOLDER WITH STACKER

- Folding area of 1800 x 1200mm;

- 04 separation rails;

- Multiple folding possibilities

- Robust construction;

- Automated with PLC touch screen;

- Velocities controlled by frequency inverter;

- Manufactured within international safety and operation standards.

VACUUM FEEDER FOR IRONERS

- Available in widths of 3000 and 3300mm;

- Double Exhaust System;

- Worm Shaft for Opening the Sheets;

- Speedy Control by Frequency Inverter; 

- Digital Panel;

- Manufactured according to International Safety Standards.